Manfrotto MVH500AH Tripod Head with 190XPROB Legs

Manfrotto MVH500AH Tripod Head with 190XPROB Aluminum Legs

First off, this head is amazing for the price. It is the entry level and cheapest fluid video head they make and it holds its own against the MVH502 in my opinion. This head has Manfrottos Bridging Technology and is definitely the most affordable in that line of heads. The head uses actual ball bearings and fluid cartridges to give you a very smooth pan and tilt. The new quick plate release system clips in from the side and is tightened down to make it easier to take out your DSLR or when working with video rigs. I was worried about the plate slipping out the front or back if not tightened all the way but there are guards that prevent this from happening. The head also features a counterbalance mechanism which is a spring inside the head that helps balance your DSLR or rig when it awkward positions.  This is a super nice feature when working with larger lens or un-proportional rigs. The positioning of the drag knob is in the back so you do not have to reach around to the front like the MVH502. But the MVH500 does not have drag settings like the MVH502. But the knob to tighten the amount of drag you would like works very well. 

This head comes in a standard flat base head which can be put on basically any Manfrotto tripod legs, I went the cheaper route and put it on the 190XPROB legs and it works great. You could also get any legs with a 3/8th thread. 

The legs are a sleek 3 section design. This is an aluminum tripod and feels very sturdy with the MVH500AH head on it. I even put my battery pack on my DSLR with my Sigma 70-200mm lens and it carried the load wonderfully. The top column that hold the head is able to be put in a horizontal position allowing the tripod to reach extremely low positions. The leg angle design is a huge bonus for versatility with ranges of angles at 25,46,66, 88 degrees. This gives you such a wide range positions to set your tripod in. The top column extends and the highest working postion is 57 inches and can carry a load of 11lbs. This will handle most large DSLR rigs.